 |
 |
Innovative line feeding systems to increase your productivity
 |
 |
 |
 |
 |
 |
| At 25 Hz frequency, the feeding rail is moved with
an horizontal comings and goings movement. Parts are moved in the feeding direction thanks to the linear movement of the rail, and then this movement is reversed with a very fast speed (return speed : 10 to 15 times faster). While the reversed movement of the rail, thanks to their inertia, the parts keep their forward movement. The movements of the rail are stictly controlled by the movement law of the mechanism's cams. |
 |
| Mechanism designed for small or large parts and short transfer. Parts are quite stable on the rail. Transfer speed do not depend on the carried load. Gentle movements, without any friction, chock or overlapping of parts. High capacity. Silence of operation. Easy adaptation of the rail to any kind of parts. Possibility to use rail with several tracks in parallel. No transitory stages when the mechanism is started or stopped. Reliability of a cam mechanism, working in oil bath. Compact mechanism. |
 |
| Transfert rail after bowls. Control of parts. Put on collones, Put on lines, Separation, Dynamic stocking.
Feeding and dosing of powders. Feeding or extraction of pieces of productions chaines To extraxt scraps (i.e. : out of press ...) etc…. |
 |
||||
|
||||
 |
NEW CAMS S.A.R.L.
30 route des Futaies - 74370 VILLAZ - FRANCE
Tél :+33 (0)450 608 920 - Fax : +33 (0)450 608 930
30 route des Futaies - 74370 VILLAZ - FRANCE
Tél :+33 (0)450 608 920 - Fax : +33 (0)450 608 930